1.Compatible with Nerf N-Strike Longshot CS-6、NERF STRIKE LONGSHOT CS-12、WORKER Terminator.
2.PC high-precision injection molding, can replace the original air pump, the pump wall thickness is uniform, the inner diameter is unchanged, 150mm long cylinder, constant inner diameter, can be said to be a precedent in the injection molding industry.
3.The constant inner diameter facilitates the pump push rod to be smoothly pushed to the bottom of the pump, strengthens the pressure, strengthens the initial speed, and has a longer range. The push rod apron with a wire diameter of 3.1*28 strengthens the airtightness.
4.There is a 3MM hole in the center of the pump from the large mouth to the small mouth 55MM. The vacuum generated by the closing is solved, and the air enters after the upper jaw. That is to strengthen the airtightness and solve the problem of vacuum.
5.Please notice this kits need some installation skills, so it is generally not suitable for people under 14 years of age.All the parts are separate and you need to reassemble them.Blaster not included!
1 x Push Rod
1 x Air Pump
1 x Block Part
1 x A Pump Rubber Gasket
1 x Silicone Pad
3 x Air Pump Rubber Gasket
2 x 4*12P Screw
4 x 2.3*8PT Screw